SR6 Beta1 Horny Pitch Arms

 

NOTE: I've updated this pack to contain both stock thickness arms and arms that are reduced by 0.5mm (some servo splines are a little farther out and this can cause the pitch arms to rub together more than desired) as well as arms that have 3mm and 4mm holes, if you find yourself using 3mm ID rod ends.

These are the same as the stock pitch arms except for horn screw access and (on some) a 0.5mm reduction on the "bottom" where the two arms are touching.

 

STLs:

https://www.patreon.com/posts/sr6-beta1-horny-58146242 (free)

BOM:

None (plastic only)